Material: | Poplar |
---|---|
Grain: | Irregular Grain |
Bonding Strength: | Ⅲ(Nc) |
Plywood Type: | Veneer Boards |
Formaldehyde Emission Standards: | E1 |
Specifications: | 1250*2500mm |
Customization: |
---|
Suppliers with verified business licenses
Defects Description | B grade | C+ grade | C grade | D+ grade | D grade | E grade |
Discoloration | Unacceptable | Unacceptable | Unacceptable | Very light can accept | Very light can accept | Accept |
Dead knots | Unacceptable | Unacceptable | Diameter within 10mm can accept no more than 2 | Diameter within 10mm can accept | Diameter within 19mm can accept | Accept |
Pin knots | Unacceptable | Diameter within 3mm can accept | Diameter within 5mm can accept no more than 5 | Diameter within 5mm can accept no more than 8 | Diameter within 5 can accept no more than 10 | Accept |
Mineral line | Unacceptable | Unacceptable | Very light can Accept | Very light can accept | Very light can accept | Accept |
Chemical stain | Unacceptable | Unacceptable | Unacceptable | Very light can accept | Very light can accept | Accept |
Blue stain | Unacceptable | Unacceptable | Unacceptable | Very light can accept | Very light can accept | Accept |
Worm holes | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Accept |
Dead knot holes | Unacceptable | Unacceptable | Diameter within 5mm can accept no more than 3 putty well | Diameter within 10mm no more than 6 putty well | Diameter within 19mm, no more than 6 putty well | Accept must putty well |
End splits | Unacceptable | Within 200mm in length and 2mm in width can accept, No more than 3 putty well | Within 300mm in length and 2mm in width can accept, No more than 3 putty well | Within 300mm in length and 2mm in width can accept, No more than 6 putty well | Within 400mm in length and 2mm in width can accept, No more than 6 putty well | Accept but must putty well |
Mould | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Acceptable |
Bump | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Acceptable |
Sanding through | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable |
Glue penetration | Unacceptable | Unacceptable | Unacceptable | Very light can accept | Very light can accept | Acceptable |
Glue tapes | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Acceptable |
Delamination | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable |
Patchs | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable |
Damage on side | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Small can accept but repair well |
Blister | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable | Unacceptable |
Sound knots | Unacceptable | Unacceptable | Diameter within 19mm can accept no more than 3 | Diameter within 19mm can accept no more than 6 | Acceptable | Acceptable |
Unsound knots | Unacceptable | Unacceptable | Unacceptable | Diameter within 19mm can accept no more than 3 | Diameter within 19mm can accept no more than 6 | Acceptable |
B/BB: Whole piece face and back veneer. Face veneers are graded clear and free of defects with a light-white uniform color. Inner cores are solid birch single piece veneers.
BB/BB: Whole piece face and back. Tight pin knots may be present and inner cores are solid single piece veneers.
BB/CP: Whole piece face and back. The "CP" back veneers are downgraded from "BB" grade veneers. Inner cores are solid birch single piece veneers.
CP/CP: Whole piece face and back. The panel is sound both sides and designed for laminating.
C/C: Grade calls for patches, open knots and small veneer splits. This panel is not sanded and is primarily used in structural applications.
Shop Grades: Shop panels are also offered in the full 5×5 format in all grades listed above.
Sample picture
Suppliers with verified business licenses